ASME A112.14.6:2006 pdf download.FOG (Fats, Oils,and Greases)Disposal Systems.
(a) flow control and/or vent n.’quirements
(b) any separate trapping tiirements
(c) elevation and accessibility requirements
(d) safety and health-related instructions
(e) wiring instructions to reference national or local codes
(f) ctean-ccat locations
(g) instructions that show the clearances required for maintenance, cleaning, and prevention of hatariis
3.3 MaIntenance and Operation Documentation
Each FOG disposal system shall be provided with maintenance and operation documentation, which include a troubleshooting guide as well as instructions for performing necessary • icing or obtaining outside servicing. Units shall be provided with complete maintenance and operating instructions.
3A Installation
3.4.1 InstalLation shall be in accordance with the manulacturer’s recommendations and the applicable plumbing codes..
3.4.2 Each unit shall be packaged with illustrated directions detailing correct instaibtion procedures.
3.4.3 In buried applications of FOG disposal systems, access to each system shall be provided. There shall be access for each 10 ft (3.03 m) of length for FOG disposal systems over 20 ft (6.1 m) long. F,aich access opening shall have a leak-resistant closure (i.e., lid) that cannot slide, rotate, or flip exposing the opening, and which does not require the use of mechanical fasteners and be of a vandal-resistant type.
3.4.4 Manholes, if applicable, shall extend to grade; have a minimum diameter size of 20 in. (510mm) diameter or 20 in. X 20 in. (510 mm X 510 mm); and shall be provided with a fitted, water-tight cover. Manholes shall be capable of withstanding all anticipated loads and comply with IAPMO PS-I, pars. 4.7.1. which requires that all maitholes havea leak-resistant closure that, when properly installed, cannot slide, rotate, or flip exposing the opening. and which dues not require the use of mechanical fasteners.
(b) any separate trapping tiirements
(c) elevation and accessibility requirements
(d) safety and health-related instructions
(e) wiring instructions to reference national or local codes
(f) ctean-ccat locations
(g) instructions that show the clearances required for maintenance, cleaning, and prevention of hatariis
3.3 MaIntenance and Operation Documentation
Each FOG disposal system shall be provided with maintenance and operation documentation, which include a troubleshooting guide as well as instructions for performing necessary • icing or obtaining outside servicing. Units shall be provided with complete maintenance and operating instructions.
3A Installation
3.4.1 InstalLation shall be in accordance with the manulacturer’s recommendations and the applicable plumbing codes..
3.4.2 Each unit shall be packaged with illustrated directions detailing correct instaibtion procedures.
3.4.3 In buried applications of FOG disposal systems, access to each system shall be provided. There shall be access for each 10 ft (3.03 m) of length for FOG disposal systems over 20 ft (6.1 m) long. F,aich access opening shall have a leak-resistant closure (i.e., lid) that cannot slide, rotate, or flip exposing the opening, and which does not require the use of mechanical fasteners and be of a vandal-resistant type.
3.4.4 Manholes, if applicable, shall extend to grade; have a minimum diameter size of 20 in. (510mm) diameter or 20 in. X 20 in. (510 mm X 510 mm); and shall be provided with a fitted, water-tight cover. Manholes shall be capable of withstanding all anticipated loads and comply with IAPMO PS-I, pars. 4.7.1. which requires that all maitholes havea leak-resistant closure that, when properly installed, cannot slide, rotate, or flip exposing the opening. and which dues not require the use of mechanical fasteners.
