ASME A112.6.3:2001 pdf download.FLOOR AND TRENCH DRAINS.
6.1.3 Leaded Nickel Bronze (Nickel Silver). Castings shall conform to the chemical and mechanical requirements of ASTM B 584 for Copper Alloy Nos. C’973(X), C97600, and C99700. The minimum thickness for the casting shall be ‘i2 in. (4 mm).
6.1.4 ABS. Floor drain bodies manufactured from Acrylonitrile. Butadiene-Styrene (ABS) shall conform to physical property requirements contained in ASTM D 3965. The ccli classilication shall be 3-2-2-2-2. The minimum thickness for the mold shall be ‘i’ in. (4 mm). Inserts for lasteners in plastic drains shall be molded into the plastic material.
6.1.5 Pvc. Floor drain bodies manufactured from Poly (Vinyl Chloride) (PVC) shall conform to physical property requirements contained in ASTM 1)1784. The cell classification shall he 12454-B, 12454-C. or 14333-C. The minimum thickness for the mold shall be in. (4 mm). Inserts for fasteners in plastic drains shall he molded into the plastic material,
6.1.6 BoltIng Materials. The materials for studs. nuts, cap screws, and other steel fasteners shall at least equal the requirements of ASTM Specifications A 307. Carbon Steel Estcmally Threaded Fasteners. Grade A. and A 563. Carbon and Alloy Steel Nuts. Grade A. Threads shall be Classes 2A and 213, and shall be plated.
6.2 Finishes
In all cases in which parts are to be coated or plated. they shall be cleaned to provide a suitable surface for proper bonding 01’ the finish.
6.2.1 Paint Coatings. Iron castings shall be cleaned and coated with a suitable paint. lacquer. or synthetic coating of quality to provide protection against rusting of ferrous surfaces during normal handling and warehousing prior to installation.
6.1.4 ABS. Floor drain bodies manufactured from Acrylonitrile. Butadiene-Styrene (ABS) shall conform to physical property requirements contained in ASTM D 3965. The ccli classilication shall be 3-2-2-2-2. The minimum thickness for the mold shall be ‘i’ in. (4 mm). Inserts for lasteners in plastic drains shall be molded into the plastic material.
6.1.5 Pvc. Floor drain bodies manufactured from Poly (Vinyl Chloride) (PVC) shall conform to physical property requirements contained in ASTM 1)1784. The cell classification shall he 12454-B, 12454-C. or 14333-C. The minimum thickness for the mold shall be in. (4 mm). Inserts for fasteners in plastic drains shall he molded into the plastic material,
6.1.6 BoltIng Materials. The materials for studs. nuts, cap screws, and other steel fasteners shall at least equal the requirements of ASTM Specifications A 307. Carbon Steel Estcmally Threaded Fasteners. Grade A. and A 563. Carbon and Alloy Steel Nuts. Grade A. Threads shall be Classes 2A and 213, and shall be plated.
6.2 Finishes
In all cases in which parts are to be coated or plated. they shall be cleaned to provide a suitable surface for proper bonding 01’ the finish.
6.2.1 Paint Coatings. Iron castings shall be cleaned and coated with a suitable paint. lacquer. or synthetic coating of quality to provide protection against rusting of ferrous surfaces during normal handling and warehousing prior to installation.
