BS ISO 29845:2011 pdf download.Technical product documentation—Document types.
3.2.8
outline drawing
drawing giving the outside peripheral envelope, overall dimensions and mass of an abject
NOTE Adapted from ISO 1O2O91 :1992
3.2.9
supplier drawing
drawing defining a part developed and owned by an external supplier
3.2.10
Illustration drawIng
drawing showing figures and sketches for any general purpose which is not covered by the mote specific document types
3.2.11
space envelope drawing
drawing showing the maximum space which can occupied for an intended design solution and the geometrically significant interfaces of components and assemblies which are not yet designed in detail
3.2.12
block plan
drawing which identifies a site and locates the outlines of Construction works in relation to a town plan or similar document
PSO 10209-1:1992. 3.3]
3.2.13
site plan
layout drawing giving the position of construction works in relation to the setting out points, the means of access and the general layout of a site
NOTE Adapted from ISO 10209-1:1992
3.2.14
part model
model In which the product described Is one single item
3.2.15
assembly model
model in which the product described is an assembly of two or more items
[ISO 16792:2006. 3.3]
3.2.16
Installation model
model in which the product described is an installation, showing paris or assemblies and a partial at complete representation of the instalation site
[ISO 16792:2006, 3.17]
3.2.17
Interference model
model that shows the overall geometry and the space required as well as possible collisions
3.2.18
space envelope model
model showing the maximum space which can occupied for an intended design solution and the geometrically significant interfaces of components and assemblies which are not yet designed in detail.
outline drawing
drawing giving the outside peripheral envelope, overall dimensions and mass of an abject
NOTE Adapted from ISO 1O2O91 :1992
3.2.9
supplier drawing
drawing defining a part developed and owned by an external supplier
3.2.10
Illustration drawIng
drawing showing figures and sketches for any general purpose which is not covered by the mote specific document types
3.2.11
space envelope drawing
drawing showing the maximum space which can occupied for an intended design solution and the geometrically significant interfaces of components and assemblies which are not yet designed in detail
3.2.12
block plan
drawing which identifies a site and locates the outlines of Construction works in relation to a town plan or similar document
PSO 10209-1:1992. 3.3]
3.2.13
site plan
layout drawing giving the position of construction works in relation to the setting out points, the means of access and the general layout of a site
NOTE Adapted from ISO 10209-1:1992
3.2.14
part model
model In which the product described Is one single item
3.2.15
assembly model
model in which the product described is an assembly of two or more items
[ISO 16792:2006. 3.3]
3.2.16
Installation model
model in which the product described is an installation, showing paris or assemblies and a partial at complete representation of the instalation site
[ISO 16792:2006, 3.17]
3.2.17
Interference model
model that shows the overall geometry and the space required as well as possible collisions
3.2.18
space envelope model
model showing the maximum space which can occupied for an intended design solution and the geometrically significant interfaces of components and assemblies which are not yet designed in detail.
