IS0 11680-1:2011 pdf download.Machinery for forestry -Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine.
3 Terms and definitions
For the purpose of this document, the terms and detnitions oven In ISO 6531, ISO 7112 and ISO 12100 and the following apply.
pole-mounted powered pruner
machine whose power source is attached via a long drive-shaft tube (pole) to a cutting attachment, designed to enable an operator to cut branches from a distance
NOTE See Figure 1 tar an exampte of a pole-rno.xited powered pruner with integral combustion engine and a sawchain cutting attachment within the Scope of this part of ISO 11680.
4 Safety requirements and/or protective measures
4.1 General
Machines shall comply with the safety requirements and/or protective measures of this ctaus.e. In addition, the machine shall be designed according to the principles of ISO 12100 for relevant but not significant hazards which are not dealt with by this part of ISO 11680.
The safe operation of a pole-mounted powered pruner also depends on the sale environment associated with the use of personal protective equment (PPE). such as gloves, slip-resistant footwear, and eye, hearing and head protective equipment, as well as safe working procedures (see 5.1).
Except where otherwise specified in this part of ISO 11680, the safety distances specified in ISO 13857:2008. 4.2.4.1 and 42.4.3.
For the purpose of this document, the terms and detnitions oven In ISO 6531, ISO 7112 and ISO 12100 and the following apply.
pole-mounted powered pruner
machine whose power source is attached via a long drive-shaft tube (pole) to a cutting attachment, designed to enable an operator to cut branches from a distance
NOTE See Figure 1 tar an exampte of a pole-rno.xited powered pruner with integral combustion engine and a sawchain cutting attachment within the Scope of this part of ISO 11680.
4 Safety requirements and/or protective measures
4.1 General
Machines shall comply with the safety requirements and/or protective measures of this ctaus.e. In addition, the machine shall be designed according to the principles of ISO 12100 for relevant but not significant hazards which are not dealt with by this part of ISO 11680.
The safe operation of a pole-mounted powered pruner also depends on the sale environment associated with the use of personal protective equment (PPE). such as gloves, slip-resistant footwear, and eye, hearing and head protective equipment, as well as safe working procedures (see 5.1).
Except where otherwise specified in this part of ISO 11680, the safety distances specified in ISO 13857:2008. 4.2.4.1 and 42.4.3.
