AS ISO 22915.1:2015 pdf download.lndustrial trucks-Verification ofstability Part 1: General.
It also applies to trucks operating under the same conditions when equipped with load-handling attachments. This part of ISO 22915 does not apply to:
trucks handling suspended loads which may swing freely:
low-lift trucks with lift height up to and including 500 mm.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. Foc undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3411, Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope
ISO 5053, Powered industrial trucks — Terminology
ISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply. normal operating conditions
(trucks other than variable reach and rough-terrain trucks> operating conditions corresponding to
a) stacking with fork arms reasonably honzontal on substantially firm, smooth, level, and prepared surfaces,
b) operating with a load centre of gravity approximately on the longitudinal centre plane of the truck,
c) travelling with the mast or fork arms tilted rearward, if possible, and the load in the lowered (travel) position on substantially firm, smooth, level, and prepared surface; for reach trucks, with the mast o forks fully retracted.
d) travelling or manoeuvring with elevated loadloperator (if the truck is specifically designed for this condition).
trucks handling suspended loads which may swing freely:
low-lift trucks with lift height up to and including 500 mm.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. Foc undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3411, Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope
ISO 5053, Powered industrial trucks — Terminology
ISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply. normal operating conditions
(trucks other than variable reach and rough-terrain trucks> operating conditions corresponding to
a) stacking with fork arms reasonably honzontal on substantially firm, smooth, level, and prepared surfaces,
b) operating with a load centre of gravity approximately on the longitudinal centre plane of the truck,
c) travelling with the mast or fork arms tilted rearward, if possible, and the load in the lowered (travel) position on substantially firm, smooth, level, and prepared surface; for reach trucks, with the mast o forks fully retracted.
d) travelling or manoeuvring with elevated loadloperator (if the truck is specifically designed for this condition).
