AS ISO 22915.4:2015 pdf download.lndustrial trucks-Verification of stability Part 4: Pallet stackers, double stackersand order-picking trucks with operator position elevating up to and including 1 200 mm lift height.
This part of ISO 22915 specifies tests for verifying the stabIlity of
— pallet stackers.
— double stackers, and ocder-picking trucks with an operator position elevating up to ano IncluöII19 I inril idi Iiiyiut, measured from the ground to the floor of the platform
It is applicable to these types of industrial truck, whether with tilting or non-tilting masts or fork arms, having a rated capacity up to and including 5000 kg.
It is also applicable to such trucks operating under the same conditions when equipped with load-handlIng attachments and to order-picking trucks with an elevating operators position up to and Including 1 200 mm lift height when equipped with an additional load-lifting device(s).
2 Normative references
The following referenced documents are indispensable for the application of this document, For dated references, only the edition cited applies, For undated references, the latest edition of the referenced document (mcluding any amendments) applies.
ISO 5053. Powered industrial trucks — Terminology
ISO 22915-1. Industrial trucks — Venificat,o,, oif stability — Pail 1: General
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22915-1 apply.
4 Test conditions
4.1 General
See ISO 22915-1.
— pallet stackers.
— double stackers, and ocder-picking trucks with an operator position elevating up to ano IncluöII19 I inril idi Iiiyiut, measured from the ground to the floor of the platform
It is applicable to these types of industrial truck, whether with tilting or non-tilting masts or fork arms, having a rated capacity up to and including 5000 kg.
It is also applicable to such trucks operating under the same conditions when equipped with load-handlIng attachments and to order-picking trucks with an elevating operators position up to and Including 1 200 mm lift height when equipped with an additional load-lifting device(s).
2 Normative references
The following referenced documents are indispensable for the application of this document, For dated references, only the edition cited applies, For undated references, the latest edition of the referenced document (mcluding any amendments) applies.
ISO 5053. Powered industrial trucks — Terminology
ISO 22915-1. Industrial trucks — Venificat,o,, oif stability — Pail 1: General
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22915-1 apply.
4 Test conditions
4.1 General
See ISO 22915-1.
