AS ISO 22915.16:2015 pdf download.lndustrial trucks-Verification of stability Part 16: Pedestrian-propelled trucks.
This part of ISO 22915 specifies tests for verifying the stability of pedestrian.propeiled trucks. It is applicable to
— straddle, pallet and platform stacker trucks with capacities not exceeding 1 000kg. with manual or battery-powered lift;
— scissors lift pallet trucks with lift heights up to 1 000 mm and rated capacity up to 1 000kg. with manual or battery-powered lift:
— platform trucks.
It also applies to trucks operating under the same conditions when equipped with load-handling attachments.
It Is not applicable to trucks with retractable devices such as a mast or fork.
2 NormatIve references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for Its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 22915-1, Industrial trucks — Verification of stability — Part 1: General
ISO 3691-5:2014, Industrial trucks — Safety requirements and verification — PartS: Pedestrian-propelled trucks
ISO 5053. Powered industrial trucks — Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22951-1 apply.
4 Requirements
4.1 General
See ISO 22915.1.
4.2 Position of the truck on the tilt table
All tests shall be carried out with castors and swivelling wheels, when fitted, in the position of least stability (see Tables 1,2 and 3).
— straddle, pallet and platform stacker trucks with capacities not exceeding 1 000kg. with manual or battery-powered lift;
— scissors lift pallet trucks with lift heights up to 1 000 mm and rated capacity up to 1 000kg. with manual or battery-powered lift:
— platform trucks.
It also applies to trucks operating under the same conditions when equipped with load-handling attachments.
It Is not applicable to trucks with retractable devices such as a mast or fork.
2 NormatIve references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for Its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 22915-1, Industrial trucks — Verification of stability — Part 1: General
ISO 3691-5:2014, Industrial trucks — Safety requirements and verification — PartS: Pedestrian-propelled trucks
ISO 5053. Powered industrial trucks — Terminology
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5053 and ISO 22951-1 apply.
4 Requirements
4.1 General
See ISO 22915.1.
4.2 Position of the truck on the tilt table
All tests shall be carried out with castors and swivelling wheels, when fitted, in the position of least stability (see Tables 1,2 and 3).
