BS EN ISO 15547-2:2005 pdf download.Petroleum, petrochemical andnatural gas industries—-Plate-typeheat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers.
pressure design code
recognized pressure vessel standard specified or agreed by the purchaser EX.AMPtE ASME Section VIII, EN 13445.
2.6
structural welding code
recognized structural welding code specified or agreed by the purchaser
3 General
3.1 The pressure design code shall be specified or agreed by the purchaser. Pressure components shall comply with the pressure design code and the supplemental requirements In this part of ISO 15547.
The structural welding code shall be specified or agreed by the purchaser
3.2 Annex A provides some recommended practices for Information.
3.3 The vendor shall comply with the applicable local regulations specified by the purchaser.
3.4 If specified by the purchaser, or if required by regulations, the vendor shall register each plate-fin heat exchanger.
3.5 Furiher information on brazed aluminium plate-fin heat exchangers can be found in the AI..PEMA standards
4 Proposal Information required
4.1 The vendor shatl provide a completed data sheet, including materials of construction. An example of a
suitable format is given in Annex C.
4.2 The vendor shall specify operating limitations. e.g. temperature limits.
4.3 The vendor shall include a detailed description of any exception to the specified requirements.
4.4 The tlrst-time use of a plate-fin heat exchanger design, component or material by the vendor for the purchaser’s intended service shatl be clearly indicated by the vendor.
4.5 The vendor shall provide recommended strainer requirements for each stream
4.6 ft a mercury-tolerant design is specified by the purchaser, the vendor shall provide details of special design, manufacturing techniques and operating procedures.
recognized pressure vessel standard specified or agreed by the purchaser EX.AMPtE ASME Section VIII, EN 13445.
2.6
structural welding code
recognized structural welding code specified or agreed by the purchaser
3 General
3.1 The pressure design code shall be specified or agreed by the purchaser. Pressure components shall comply with the pressure design code and the supplemental requirements In this part of ISO 15547.
The structural welding code shall be specified or agreed by the purchaser
3.2 Annex A provides some recommended practices for Information.
3.3 The vendor shall comply with the applicable local regulations specified by the purchaser.
3.4 If specified by the purchaser, or if required by regulations, the vendor shall register each plate-fin heat exchanger.
3.5 Furiher information on brazed aluminium plate-fin heat exchangers can be found in the AI..PEMA standards
4 Proposal Information required
4.1 The vendor shatl provide a completed data sheet, including materials of construction. An example of a
suitable format is given in Annex C.
4.2 The vendor shall specify operating limitations. e.g. temperature limits.
4.3 The vendor shall include a detailed description of any exception to the specified requirements.
4.4 The tlrst-time use of a plate-fin heat exchanger design, component or material by the vendor for the purchaser’s intended service shatl be clearly indicated by the vendor.
4.5 The vendor shall provide recommended strainer requirements for each stream
4.6 ft a mercury-tolerant design is specified by the purchaser, the vendor shall provide details of special design, manufacturing techniques and operating procedures.
