ISO 3834-3:2005 pdf download.Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements.
5 Review of requirements and technical review
5.1 General
The manufacturer shall review the contractual requirements and any other requirements, together with any technical data provided by the purchaser or in-house data when the construction is designed by the manufacturer. The manufacturer shall establish that all information necessary to carry Out the manufacturing operations is complete and available prior to the commencement of the work. The manufacturer shall affirm its capability to meet all requirements and shall ensure adequate planning of all quality-related activities.
The review of requirements is carried out by the manufacturer to verify that the work content is within its capability to perform, that sufficient resources are available to achieve delivery schedules and that documentation is clear and unambiguous. The manufacturer shall ensure that any variations between the contract and any previous quotation are identified and the purchaser notified of any programme, cost o engineering changes that may result.
Items in 5.2 are typically considered at or before the time of the review of requirements. Items in 5.3 usually form part of the technical review and are considered during the initial planning stage.
When a contract does not exist. e.g. items made for stock, the manufacturer is required to take into consideration the requirements of 5.2 while carrying out the technical review (see 5.3).
5.2 Review of requirements
Aspects to be considered shall include the following:
a) the product standard to be used, together with any supplementary requirements;
b) statutory and regulatory requirements;
C) any additional requirement determined by the manufacturer:
d) the capability of the manufacturer to meet the prescribed requirements.
5.3 Technical review
Technical requirements to be considered shall include the following:
a) parent material(s) specification and welded joint properties:
b) quality and acceptance requirements for welds.
5.1 General
The manufacturer shall review the contractual requirements and any other requirements, together with any technical data provided by the purchaser or in-house data when the construction is designed by the manufacturer. The manufacturer shall establish that all information necessary to carry Out the manufacturing operations is complete and available prior to the commencement of the work. The manufacturer shall affirm its capability to meet all requirements and shall ensure adequate planning of all quality-related activities.
The review of requirements is carried out by the manufacturer to verify that the work content is within its capability to perform, that sufficient resources are available to achieve delivery schedules and that documentation is clear and unambiguous. The manufacturer shall ensure that any variations between the contract and any previous quotation are identified and the purchaser notified of any programme, cost o engineering changes that may result.
Items in 5.2 are typically considered at or before the time of the review of requirements. Items in 5.3 usually form part of the technical review and are considered during the initial planning stage.
When a contract does not exist. e.g. items made for stock, the manufacturer is required to take into consideration the requirements of 5.2 while carrying out the technical review (see 5.3).
5.2 Review of requirements
Aspects to be considered shall include the following:
a) the product standard to be used, together with any supplementary requirements;
b) statutory and regulatory requirements;
C) any additional requirement determined by the manufacturer:
d) the capability of the manufacturer to meet the prescribed requirements.
5.3 Technical review
Technical requirements to be considered shall include the following:
a) parent material(s) specification and welded joint properties:
b) quality and acceptance requirements for welds.
