lSO 3834-2:2005 pdf download.Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements.
10.2 Welding-procedure specifications
The manufacturer shall prepare the welding-procedure specification(s) and shall ensure mat these are used correctly in pi’oduction.
The ISO documents to which it le required to conform to fulfil the quality requirements are specifIed In
ISO 3834.5:2005, Table 4, for arc welding, electron beam welding, laser beam welding and gas welding, and
In ISO 3834-5:2005, Table 10, for other fusion welding processes.
10.3 Qualification of the welding procedures
Welding procedures shall be qualified prIor to production, The method of qualification shall bern accordance with relevant product standerds or as stated in the specification.
The ISO documents to which it required to conform to fulfIl the quality requirements are specified in
ISO 38345:2005, Table 5, for arc welding, electron beam welding, laser beam welding and gas welding, and
In 1S03834-5:2005, Table 10, for other fusion welding processes.
NOTE Qualification of other procedures may be required m the rlevant product standards andFor the soecilication(s)
10.4 Work instructions
The manufacturer may use the welding-procedure specification directly tot Instruction purposes. Alternatively. dedicated work instructions may be used. Such dedicated work Instructions shall b. prepared front a quakfied Mldiiidtire pc*flcâtIdn and do not require separate qualification.
10.5 Procedures for preparation and control of documents
The manufacturer shall establish and maintain procedures for the preparation and control of relevant quabty documents (e.g. welding-procedure specification, welding-procedure qualification record, welders arid welding-operators qualification certificates).
11 Welding consumables
11.1 General
Responsibilities and procedures for control of welding consumables shall be specified.
The manufacturer shall prepare the welding-procedure specification(s) and shall ensure mat these are used correctly in pi’oduction.
The ISO documents to which it le required to conform to fulfil the quality requirements are specifIed In
ISO 3834.5:2005, Table 4, for arc welding, electron beam welding, laser beam welding and gas welding, and
In ISO 3834-5:2005, Table 10, for other fusion welding processes.
10.3 Qualification of the welding procedures
Welding procedures shall be qualified prIor to production, The method of qualification shall bern accordance with relevant product standerds or as stated in the specification.
The ISO documents to which it required to conform to fulfIl the quality requirements are specified in
ISO 38345:2005, Table 5, for arc welding, electron beam welding, laser beam welding and gas welding, and
In 1S03834-5:2005, Table 10, for other fusion welding processes.
NOTE Qualification of other procedures may be required m the rlevant product standards andFor the soecilication(s)
10.4 Work instructions
The manufacturer may use the welding-procedure specification directly tot Instruction purposes. Alternatively. dedicated work instructions may be used. Such dedicated work Instructions shall b. prepared front a quakfied Mldiiidtire pc*flcâtIdn and do not require separate qualification.
10.5 Procedures for preparation and control of documents
The manufacturer shall establish and maintain procedures for the preparation and control of relevant quabty documents (e.g. welding-procedure specification, welding-procedure qualification record, welders arid welding-operators qualification certificates).
11 Welding consumables
11.1 General
Responsibilities and procedures for control of welding consumables shall be specified.
