UL 201:2008 pdf download.Garage Equipment. 17.2.3 Sleeving. tape. and tubing used for insulation on wires shall be rated for the voltage and temperature Involved. 17.2.3 effectIve ,January 27, 2007 17.3 SplIces and connections 17.3.1 Splices...
UL 194:2016 pdf download.Gasketed Joints for Ductile-Iron Pipe and Fittings for Fire Protection Service. 9A NonmetallIc Materials Test 9A.1 Plastic or other nonmetallic parts (excluding rubber and synthetic elastomers) that are intended to f...
UL 193:2016 pdf download.Alarm Valves for Fire-Protection Service. 7 Sizes 7.1 Valve sizes refer to the nominal diameter of the waterway through the inlet and outlet connections and to the nominal pipe size for which the connections are inte...
UL 183:2016 pdf download.Manufactured Wiring Systems. 4) Enclosures molded of polymeric materials shall comply with the Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Ha...
UL 181B:2017 pdf download.Closure Systems for Use With Flexible Air Ducts and Air Connectors. 8 TensIle Strength Test 8.1 The average tensile strength in the machine direction of each roll of tape shall be not less than 17 pounds per Inch (2...
UL 180:2012 pdf download.Liquid-Level Gauges for Oil Burner Fuels and Other Combustible Liquids. 9.6.3 In such cases where testing with a Class Ill Combustible Liquid is necessary, automotive grade 30W Lubricating Oil and 80W Transmission Oi...
UL 174:2019 pdf download.Household Electric Storage Tank Water Heaters. 7 Mechanical Assembly 7.1 An electrical component shall be securely mounted in place. 7.2 A surface-mounted temperature control shall be: a) Secured indirectly to the st...
UL 154:2019 pdf download.Carbon-Dioxide Fire Extinguishers. 13 Hose 13.1 An extinguisher having a capacity of more than 2.7 kg (6 lb)-mass of carbon dioxide shall be equipped with a discharge hose. A hose shall be flexible and of a length no...
UL 147:2016 pdf download.Hand-Held Torches For Fuel Gases. 5.4 II specific fittings or parts are required for making the intended assembly, such paris shall be furnished by the manufacturer with cacti torch unit. 5.5 A torch unit shall be pr...
UL 144:2002 pdf download.LP-Gas Regulators. 6 MaterIals 6.1 A part of a regulator in contact with LP-Gas shall be resistant to the action of the fluid under the service conditions to wtudi it is subjected. 6.2 With reference to the requireme...
