BS 4483:2005 pdf download.Steel fabric for the reinforcement of concrete —— Specification.
3.8
special property
property which is not determined as part of the factory production control requirements for every test unit 3.9
standard welded fabric
welded fabric reinforcement where the bar and mesh arrangement can be defined by an identifiable fabricreference
3.10
purpose made welded fabric
welded fabric manufactured according to user's specific requirements 3.11
longitudinal bar
reinforcing steel in the manufacturing direction of the welded fabric 3.12
transverse bar
reinforcing steel perpendicular to the manufacturing direction of the welded fabric 3.13
pitch of welded fabric
centre-to-centre distance of bars in a sheet of welded fabric 3.14
overhang of welded fabric
length of longitudinal or transverse bars projecting beyond the centre of the outer crossing bar in a sheetof welded fabric
3.15
length of a welded fabric sheet
longest side of a sheet of welded fabric, irrespective of the manufacturing direction 3.16
width of a welded fabric sheet
shortest side of a sheet of welded fabric, irrespective of the manufacturing direction 3.17
bundle
two or more sheets of fabric bound together 3.18
nominal diameter
diameter of a circle with an area equal to the nominal cross-sectional area of the bar
4 Symbols
A list of symbols used in this standard,reproduced from BS EN 10080:2005, is given in Table 1.
