BS EN 1009-2:2020 pdf download.Machines for mechanical processing of minerals and similar solid materials - Safety —— Part 2: Specific requirements for feeding machinery and continuous handling equipment.
If the feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material feeding and adjust the flow (e.g. inserting bars, closing gate or flap).
4.3 RecIprocating plate feeders
4.3.1 Guards in accordance with EN 1009-1:2020. 411 shall be provided for the crushing or shearing points due to the oscillating movement of the plate feeder (e.g. at the transfer points).
4.3.2 For inclined reciprocating plate feeders, means for locking against incidental moving during maintenance shall be provided.
If the feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material fcedlng and adjust the Flow (e.g. inserting bars. closing gate or flap).
4.4 Apron feeder
4.4.1 Particularly the design of the transporting section of inclined apron feeders shall consider that material rolling back cannot get outside the feeder or its hoppers/chutes.
4.4.2 During maintenance work, the apron feeder deck shall be protected against reverse motion, at least by means of a back stop.
4.4.3 It shall be ensured that the moving parts cannot be reached by the operator by guards complying weth EN 1009-1:2020. 4.11.
lithe feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material feeding and adjust the flow (e.g. inserting bars. closing gate or flap).
4.5 Belt feeder
lithe feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material feeding and adjust the flow (e.g. Inserting bars. closing gate or flap).
4.3 RecIprocating plate feeders
4.3.1 Guards in accordance with EN 1009-1:2020. 411 shall be provided for the crushing or shearing points due to the oscillating movement of the plate feeder (e.g. at the transfer points).
4.3.2 For inclined reciprocating plate feeders, means for locking against incidental moving during maintenance shall be provided.
If the feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material fcedlng and adjust the Flow (e.g. inserting bars. closing gate or flap).
4.4 Apron feeder
4.4.1 Particularly the design of the transporting section of inclined apron feeders shall consider that material rolling back cannot get outside the feeder or its hoppers/chutes.
4.4.2 During maintenance work, the apron feeder deck shall be protected against reverse motion, at least by means of a back stop.
4.4.3 It shall be ensured that the moving parts cannot be reached by the operator by guards complying weth EN 1009-1:2020. 4.11.
lithe feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material feeding and adjust the flow (e.g. inserting bars. closing gate or flap).
4.5 Belt feeder
lithe feeder is located under stockpile, bins or glory hole, in order to reduce burying hazard during maintenance, means shall be provided to stop material feeding and adjust the flow (e.g. Inserting bars. closing gate or flap).
