BS EN 500-6:2006 pdf download.Mobile road construction machinery -safety — Part 6: Specific requirements for paver-finishers.
The brake systems shall meet the requirements of EN ISO 3450 with the following additions and exceptions:
A.2 Machine mass
A.2.1 General
Clause 3 of EN ISO 3450:1996 applies with the following addition:
A.2.2 Operating mass
Operating mass in the heaviest version of the paver-finisher, including canopy or cabin with al hew components and mountings and by consideflng all working elements to be fitted for the maximum working width approved by the manufacturer of the machine, including operator of 75 kg. half-full fuel tank and full lubricating system, hydraulic oil system and cooling system. If equipped, with half-ful tanks for emulsion and emulsion solvent.
A.3 General requIrements
All General
Clause 5 of EN ISO 3450:1996 applies with the following addition:
A.3.2 DisconnectIon
If a device Is fitted for disconnection, such as a clutch or a gearbox. then this shall only be operated at standstill
The brake systems are permitted to be effective via gear components and chains and to possess only one braking
surface for all wheels slowed down.
A.3.3 Service brake system
On machines with a hydrostatic traction drive developing a maximum speed of no more than 25 kmlh, this hydrostatic traction drive can at the same time be used as a service brake. After standstill, an unintentional movement shall not be possible.
A.2 Machine mass
A.2.1 General
Clause 3 of EN ISO 3450:1996 applies with the following addition:
A.2.2 Operating mass
Operating mass in the heaviest version of the paver-finisher, including canopy or cabin with al hew components and mountings and by consideflng all working elements to be fitted for the maximum working width approved by the manufacturer of the machine, including operator of 75 kg. half-full fuel tank and full lubricating system, hydraulic oil system and cooling system. If equipped, with half-ful tanks for emulsion and emulsion solvent.
A.3 General requIrements
All General
Clause 5 of EN ISO 3450:1996 applies with the following addition:
A.3.2 DisconnectIon
If a device Is fitted for disconnection, such as a clutch or a gearbox. then this shall only be operated at standstill
The brake systems are permitted to be effective via gear components and chains and to possess only one braking
surface for all wheels slowed down.
A.3.3 Service brake system
On machines with a hydrostatic traction drive developing a maximum speed of no more than 25 kmlh, this hydrostatic traction drive can at the same time be used as a service brake. After standstill, an unintentional movement shall not be possible.
