ASME MFC-11M:2003 pdf download.MEASUREMENT OF FLUID FLOW BYMEANS OF CORIOLIS MASS FLOWMETERS. 5.4 Zero Adjustment Alter the meter installation is complete, a zero adjustment might be needed to overcome the effects described in para. 53. It i...
ASME MFC-12M:2006 pdf download.Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements. 4 OPERATING PRINCIPLES 4.1 Description of Operation The multiport averaging Pilot primary flow element or averaging...
ASME B16.15:2006 pdf download.Cast Copper Alloy Threaded Fittings. 6.2 Tolerances The permissible tolerance in taper threading shall be limited to one turn large or one turn small from the gaging face on ring and gaging notch on plug, when u...
ASME B16.14:2010 pdf download.Ferrous Pipe Plugs,Bushings, and Locknuts With Pipe Threads. 5 MARKING Each fitting shall be marked for identification with the manufacturers name or trademark, except where a marking is impractical. 6 MATERIALS...
ASME B16.12:2009 pdf download.Cast lron Threaded Drainage Fittings. 3 MARKING Each fitting shall be marked with the manufacturers name or trademark in accordance with the requirements of MSS Standard Practice No. SP-25. 4 MATERIALS 4.1 Casti...
ASME B16.10:2009 pdf download.Face-to-Faceand End-to-End Dimensions of Valves. 3.2 Other Standard Facings Table 9 data on all flange lacIngs and can be used with Tables I through 6 (Tables I-I through 1-6) in calculating lace-to-face and end...
ASME B1.10M:2004 pdf download.UNFIED MINIATURE SCREW THREADS. 1.5 AcceptabIlity Additional recommended methods for determining the acceptability of miniature screw threads will be included as further experience with this thread standard is r...
ASME B1.7:2006 pdf download.Screw Threads:Nomenclature,Definitions, and Letter Symbols. bilateral tolerance: a tolerance in which variation is equally larger and smaller than the specified dimension. a design plan that uses only bilateral to...
ASME B1.13M:2005 pdf download.Metric Screw Threads:M Profile. 5.7 Circular Runout Circular runout is the lull indicator movement (FIM) (see ASME Y14.5). Runout of the crest (minor diameter of internal thread or major diameter of external thr...
ASME AG-1:2012 pdf download.Code on Nuclear Air and Gas Treatment. (2) each member of the chain depicted in Fig. AA-8130 shall be responsible for notifying the party that qualified their program of planned modifications that might affect the...
