ASME A112.19.16:2006 pdf download.Terrazzo Plumbing Fixtures. 3.1.2 Performance Requirements. The test samples that do not comply with the performance requirements as set forth in the applicable ANSI or CSA standard shall be cause for reccti...
ASME A112.19.12:2000 pdf download.WALL MOUNTED AND PEDESTAL MOUNTED, DJUSTABLE AND PIOTING LAVATORY ANDSINK CARRIER SYSTEMS. 3.1.2 Vertical Adjustment 3.1.2.1 Test Method. lhe assembled systemshall be operated throughout its full range of ve...
ASME A112.19.19:2006 pdf download.Vitreous China Nonwater Urinals. sanitary: for the purposes of this Standard, indicates an aesthetic condition of cleanliness., not microbiologically clean. segregat ton: more than the allowable number of de...
ASME A112.19.1:2013 pdf download.Enamelled cast iron and enamelled steel plumbing fixtures. 4.5.1.3 Factory-supplied waste fittings shall comply with ASME A112.18.2/ CSA B125.2. 4.5.2 Overflows 4.5.2.1 Provision and positioning Overflows in...
ASME A112.18.1:2012 pdf download.Plumbing supply fittings. Primary outlet the outlet from a supply fitting on the discharge side of a valve through which water will discharge unless diverted to a secondary outlet. Secondary outlet - an outle...
ASME A112.4.14:2004 pdf download.Manually Operated,Quarter-Turn Shutoff Valves for Use in Plumbing Systems. 5.1 Hydrostatk Test (a) Metallic. The test valve shall be gisen a hydrostatic test at a pressure of two times its marked pressure rat...
ASME A90.1:2003 pdf download.SAFETY STANDARD FOR BELT MANLIFTS. 4.6.1 Bottom Landing. At the bottom landing, the clear area shall be a minimum of 30 in. (750 mm) wide directly in front of the belt on both the up- and down- sides. A side land...
ASME A18.1:2005 pdf download.Safety Standard for Platform Lifts and Stairway Chairlifts. 2.1.3.5 The sides of the platform not used for entrance or exit shall be guarded by walls of smooth construction with no openings, other than those nece...
ASME A17.5:2004 pdf download.Elevator and escalator electrical equipment. 4 Enclosure construction 4.1 General 4.1.1 The enclosure of control equipment shall be constructed and assembled so that it will have the strength and rigidity necessa...
ASME A17.4:1999 pdf download.Guide for Emergency Personnel. (1) The mainline disconnect switches in the machine room for the stalled elevator and the adjacent elevators (if the stalled elevator car is located in a multiple hoistway) should b...
