ASME A112.1.2:2004 pdf download.Air Gaps in Plumbing Systems(For Plumbing Fixtures and Water-Connected Receptors). air gap, minimum required: an air gap greater than the critical air gap by a factor of safety to cover service conditions. The...
ASME B73.1:2012 pdf download.Specification for Horizontal End Suction Centrifugal Pumps for chemical Process. 5.2 Flanges 5.2.1 General. Suction and discharge nozzles shall be flanged. Flange drilling. Lacing, and minimum thickness shall con...
ASME PASE:2014 pdf download.Safety Standard for Portable Automotive Service Equipment. Thts Part apphes to attachments. adapters, and accessores that are intended to be used to conjunction with IASE descrilwd herein for the purpose of enhanc...
ASME B30.21:2005 pdf download.Manually Lever Operated Hoists. See also Table I. (a) Frequent inspections shall be performed at intervals defined in para. 21-1.3.l(b)(l) and shall include observations during operation. (b) A designated person...
ASME B16.18:2001 pdf download.CAST COPPER ALLOY SOLDER JOINT PRESSURE FITTINGS. 8 INSPECTION TOLERANCE 8.1 Linear Dimensions An inspection tolerance as shown in Table 2 shall be allowed on center-to-shoulder, center-to-center, center-to-thre...
ASME B30.17:2003 pdf download.OVERHEAD AND GANTRY CRANES. crane, outdoor: an overhead or gantry crane that operates outdoors and for which provisions are not available for storage in an area that provides protection to the crane from weather...
ASME HPS:2003 pdf download.HIGH PRESSURE SYSTEMS. 5307 Prnswe Vessel Operation The operation of a pressure vessel will depend on its application and design, with consideration of the following: The application of pressure will vary according...
ASME B16.9;2003 pdf download.FACTORY-MADE WROUGHT BUTTWELDING FITTINGS. 7SURFACE CONTOURS Where adjacent openings in fittings are not in parallelplanes, they shall be joined by a circular arc or radiuson the external surfaces. The arc or rad...
ASME A120.1:2014 pdf download.Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance. All equipment and anchorages desgned in accordance with this Standard shall be used only as herein described...
ASME B30.8:2004 pdf download.FLOATING CRANES AND FLOATING DERRICKS . gent (A:fraew): a structural frame. extending above the superstructure, to whidi the boom support ropes arc reeved. gudgeon pin: a pin connecting the mast cap to a derrick...
